When consulting epoxy floor paint materials, consumers are bound to often come into contact with the concept of one-component and two-component epoxy floor paint. So what's the difference between one-component and two-component floor paint? The following epoxy floor paint manufacturers will give you a detailed analysis: whether one-component or two-component floor paint, they all have certain advantages and disadvantages, some are applied. Work is inconvenient, some floor paint is expensive, either slow curing, or poor film performance. It can be seen that all the components of floor paint are not omnipotent, the key is to choose the floor paint we need most is the most critical.
One Component: A single component of floor paint is simply composed of a major component (excluding additives). One-component floor paint dries quickly and is easy to construct. Generally, paint and diluent are mixed to the appropriate viscosity, which can be sprayed immediately. The sprayed objects can also be sprayed on the second layer every few months. Spray the second layer every 10 minutes. If you don't want to spray, the remaining paint can be kept sealed. Unfortunately, the film is very thin every time, so the coating is more. One component paint film is thin, solid content is relatively low, construction is simple, production is high, drying speed is fast. The repairing of single component floor paint film is also simple. They also have one advantage, after a day, their solvents will volatilize almost the same, the instrument can not detect, it is good for the human body.
Bicomponent: refers to the material is composed of two components. When using this bicomponent material, the two components can not be mixed in advance. Otherwise, reactions will occur which will lead to unusable. Mixing before use belongs to mixing ready-to-use material.
Two-component epoxy floor paint includes polyurethane, polyester, two-component epoxy paint, acrylic baking paint and so on. As there are many kinds of two-component paints, here is a general waterborne polyurethane floor paint to talk about epoxy floor two-component paint. It consists of two components, the two components should be mixed before painting, if the mixing time is too long in advance, the reaction will occur, long time can not be used again. Therefore, the two-component paint should also be a small amount of multi-mixing, the remaining paint can not be re-applied due to the reaction. The chemical reaction of the paint usually results in a dense mesh film. The hardness, flexibility and fullness of the paint film are very good, and the weatherability is better. But it also has some drawbacks. Mixed paint should be used up in 4 to 6 hours.